I just find it uncool when discussing movies or for any other reason when "2012" comes up, people refer to it as "two zero one two".
That aside, Happy New Year readers!
Last weekend's project was one long overdue, highly essential and perhaps one that makes the most difference to our convenience... installing a drinking water filter.
I went out and bought one from Bacfree, cash and carry. That saves some time and money as we didn't have to wait for them to come and install the thing for us. It isn't rocket science anyway. If you want to know, the under-sink model BS-5 cost RM730 without installation.
So I spent a couple of hours on Sunday evening hooking up the filter, which was a pain because the flexible hose which I bought from the hardware store was faulty and leaked. It's just irritating to have to drive out again to replace a small but essential part.
Finally, the whole thing works according to my grand design:
Turn right for drinking water...
Turn left for pipe water.
I went out and bought one from Bacfree, cash and carry. That saves some time and money as we didn't have to wait for them to come and install the thing for us. It isn't rocket science anyway. If you want to know, the under-sink model BS-5 cost RM730 without installation.
So I spent a couple of hours on Sunday evening hooking up the filter, which was a pain because the flexible hose which I bought from the hardware store was faulty and leaked. It's just irritating to have to drive out again to replace a small but essential part.
Finally, the whole thing works according to my grand design:
Turn right for drinking water...
Turn left for pipe water.
Blessed Christmas, readers!
Yeah, all 20 or so of you who keep coming back every day.
Hope you all have a good one.
Keep supporting this blog by supporting our sponsors.
Yeah, all 20 or so of you who keep coming back every day.
Hope you all have a good one.
Keep supporting this blog by supporting our sponsors.
The bare concrete bar counter admittedly wasn't finished very well. Shoddy workmanship from the sub-contractor and all who obviously was in a hurry to get it done. Well, if you want things done right, you gotta do it yourself.
Here's what the surface of the countertop looked like before. Dollops of paint from the painters and generally rough around the edges.
This is the surface after working upwards through 120, 240 and 400 grit discs on the power sander. Much smoother and no more blemishes. The swirls you see are the 'grain' of the concrete, much in the same way wood has grain. It's part of the character of the concrete. You can see how the grain in some places has changed after the powersanding.
Next up, wet sanding of the whole surface by hand, using 800 and 1500 grit tungsten carbide sandpaper. Concrete is itself very abrasive, containing sand and other rough stuff. It really wears thru the paper as you can see in the pic. By the time I finished the wet sanding process, it had been a solid 9 hours of sweat.
Here's how the counter looked like after the whole grinding/polishing process.
Next up, sealing and waterproofing the concrete with acrylic water-based sealant.
Step 1: Saturate the surface with water. I used a sponge for this. Let the water penetrate into the concrete for a few minutes.
Step 2: Wash the surface with 50% sealant solution. Let it soak in for a few minutes
Step 3: Gradually add 100% sealant onto the wet surface until its fully covered with full strength sealant. Let it penetrate for a few minutes. When it's soaked in nicely, wipe up the excess with a damn cloth. Let it cure for 30 mins or so, then repeat a 2nd coat.
Here's what it looks like all done. You can see a slight satin transluscent sheen on the countertop. That's the layer of acrylic that's formed on the surface. It's now waterproof.
And after all that hard work, ladies and gentlemen I present to you, the piece de la resistance...
Here's what the surface of the countertop looked like before. Dollops of paint from the painters and generally rough around the edges.
This is the surface after working upwards through 120, 240 and 400 grit discs on the power sander. Much smoother and no more blemishes. The swirls you see are the 'grain' of the concrete, much in the same way wood has grain. It's part of the character of the concrete. You can see how the grain in some places has changed after the powersanding.
Next up, wet sanding of the whole surface by hand, using 800 and 1500 grit tungsten carbide sandpaper. Concrete is itself very abrasive, containing sand and other rough stuff. It really wears thru the paper as you can see in the pic. By the time I finished the wet sanding process, it had been a solid 9 hours of sweat.
Here's how the counter looked like after the whole grinding/polishing process.
Next up, sealing and waterproofing the concrete with acrylic water-based sealant.
Step 1: Saturate the surface with water. I used a sponge for this. Let the water penetrate into the concrete for a few minutes.
Step 2: Wash the surface with 50% sealant solution. Let it soak in for a few minutes
Step 3: Gradually add 100% sealant onto the wet surface until its fully covered with full strength sealant. Let it penetrate for a few minutes. When it's soaked in nicely, wipe up the excess with a damn cloth. Let it cure for 30 mins or so, then repeat a 2nd coat.
Here's what it looks like all done. You can see a slight satin transluscent sheen on the countertop. That's the layer of acrylic that's formed on the surface. It's now waterproof.
And after all that hard work, ladies and gentlemen I present to you, the piece de la resistance...
One day we turned on the tap in the wet kitchen, which runs from the water mains, and were quite disgusted at the colour. I realised that the external water filter hadn't been changed since the previous owner moved out over a year ago, and a lot of water had since passed thru it during the construction process etc. I had totally forgotten about the external filter because it was overgrown by a huge bush in front of the house, which by the way also needs some urgent trimming.
We went out and bought a whole new unit, not even gonna bother to replace the old filter element. Those things are cheap these days anyway. Check out the old filter. It's like a cess pool in there. Totally, absolutely disgusting.
An elbow pipe. This is after the filter in the line. Also fully disgusting inside. Decided to buy a new elbow too.
I had to cut a path thru the bush to get to the filter, which was installed over the drain. It really stank in there, decaying organic matter and all. But in the end, WIN for the plumber.
We went out and bought a whole new unit, not even gonna bother to replace the old filter element. Those things are cheap these days anyway. Check out the old filter. It's like a cess pool in there. Totally, absolutely disgusting.
An elbow pipe. This is after the filter in the line. Also fully disgusting inside. Decided to buy a new elbow too.
I had to cut a path thru the bush to get to the filter, which was installed over the drain. It really stank in there, decaying organic matter and all. But in the end, WIN for the plumber.
Sorry for the long silence, I've been busy honeymooning, settling in to married life, getting my ass whipped at work, and most importantly, we didn't have internet in the crib when we first moved in.
Anyway, the house is done, and we're now living in it. We managed to move in the day after our wedding, spot on the deadline which is great.
I suppose you readers all want to see the end result of all the hard work now, so here goes...
This is the view through the front door, as you first enter. The faux-wooden 'boardwalk' is in. The material is Chalet Oak from Inovar floor. It feels great to walk on, almost like real wood.
This is the view standing at the front foyer and looking towards the back of the house. The pillar with the iron pipe has been boxed up with a shelving unit.
The living area, before we unpacked the sofa. Flooring is Canyon Oak, from Inovar. It's their entry level product, but it looks and feels decent nontheless. You may notice the lack of skirting on the wall. I requested for a flushed installation with end-profiles. Skirting is so yesterday.
L-shaped sofa set. From Enoma Collection, LDP Furniture Mall. Sounds like a cross between Renoma and Enema. No Enemas on my sofa, thank you. That said, it's pretty comfy and we got a good deal on it.
View from the kitchen looking out towards the front. Pardon the curtain rail, at that point it was just makeshift and I've since installed it properly and trimmed it to size. Finished pix on that later. Pardon the pile of trash too.
Several shots of the open kitchen.
And this is the view that greets us in the morning when we come down the stairs.
Anyway, the house is done, and we're now living in it. We managed to move in the day after our wedding, spot on the deadline which is great.
I suppose you readers all want to see the end result of all the hard work now, so here goes...
This is the view through the front door, as you first enter. The faux-wooden 'boardwalk' is in. The material is Chalet Oak from Inovar floor. It feels great to walk on, almost like real wood.
This is the view standing at the front foyer and looking towards the back of the house. The pillar with the iron pipe has been boxed up with a shelving unit.
The living area, before we unpacked the sofa. Flooring is Canyon Oak, from Inovar. It's their entry level product, but it looks and feels decent nontheless. You may notice the lack of skirting on the wall. I requested for a flushed installation with end-profiles. Skirting is so yesterday.
L-shaped sofa set. From Enoma Collection, LDP Furniture Mall. Sounds like a cross between Renoma and Enema. No Enemas on my sofa, thank you. That said, it's pretty comfy and we got a good deal on it.
View from the kitchen looking out towards the front. Pardon the curtain rail, at that point it was just makeshift and I've since installed it properly and trimmed it to size. Finished pix on that later. Pardon the pile of trash too.
Several shots of the open kitchen.
And this is the view that greets us in the morning when we come down the stairs.
The door arrived at the crib first thing in the morning. The workers got cracking right away. Power tools are amazing. With the power router, the guy managed to precisely cut the slots in the door for the hinges within a matter of seconds.
Some hours later, at lunchtime the door is in its rightful place.
With clearance underneath for the Inovar Flooring to go. And some grubby fingerprints.
Some hours later, at lunchtime the door is in its rightful place.
With clearance underneath for the Inovar Flooring to go. And some grubby fingerprints.
Sunday Night:
We had our first meal in the crib. Oblong Burger Daging Special with lots of sautee'd onions. Yum.
Only one stool, so the ladder would have to do for a table for two.
Wednesday:
Main door is scheduled to arrive.
Thursday:
Kitchen cabinets to be installed
Friday:
Bed frame to arrive.
Saturday:
We get married
Monday:
Laminate flooring gets installed
We had our first meal in the crib. Oblong Burger Daging Special with lots of sautee'd onions. Yum.
Only one stool, so the ladder would have to do for a table for two.
Wednesday:
Main door is scheduled to arrive.
Thursday:
Kitchen cabinets to be installed
Friday:
Bed frame to arrive.
Saturday:
We get married
Monday:
Laminate flooring gets installed
Sitting in our bare living hall, on the freshly mopped marble floor we waitied for the lorry to arrive.
Finally it came, with its accompanying soundtrack. A welcome sight.
We took delivery of our L-shape sofa set. It comes in 2 detachable pieces. Grey and orange colour scheme.
Mattress, but no bed yet. It got held up, maybe arriving on Monday.
And finally as we locked up to leave for the day, an encounter with the local wildlife.
Finally it came, with its accompanying soundtrack. A welcome sight.
We took delivery of our L-shape sofa set. It comes in 2 detachable pieces. Grey and orange colour scheme.
Mattress, but no bed yet. It got held up, maybe arriving on Monday.
And finally as we locked up to leave for the day, an encounter with the local wildlife.
Tomorrow, the first of our furniture should arrive.
One bed, and one sofa.
Actually, that's all the furniture we can afford for now.
Stay tuned!
One bed, and one sofa.
Actually, that's all the furniture we can afford for now.
Stay tuned!
Just one shot for today, and that's the wardrobe getting its doors. Anti-jump sliding doors are par for the course these days.
Just so y'all know,
we're now down to single digits.
You may note the Faucet Fund stands at RM3.65.
You may also note that the Designer Tap featured here is now proudly in its place on the bar counter.
NOW is the time to do something about the Faucet Fund, folks.
You all know what to do!
we're now down to single digits.
You may note the Faucet Fund stands at RM3.65.
You may also note that the Designer Tap featured here is now proudly in its place on the bar counter.
NOW is the time to do something about the Faucet Fund, folks.
You all know what to do!
Despite the inevitable shennanigans creeping up here and there, progress continues to be made on the crib.
The marble floor gets shined up real nice
The bar counter gets tricked with some pimp-ass black on black tiles
The skirting on the interior of the bar counter gets built
And this is where the house stands now.
Upstairs:
Downstairs:
The marble floor gets shined up real nice
The bar counter gets tricked with some pimp-ass black on black tiles
The skirting on the interior of the bar counter gets built
And this is where the house stands now.
Upstairs:
Downstairs:
Subscribe to:
Posts (Atom)