Showing posts with label Concrete. Show all posts
Showing posts with label Concrete. Show all posts
Now that the old chainlink is down, we can move on to constructing the timber fence proper. This is the eventual goal... or something quite similar.
The bare concrete bar counter admittedly wasn't finished very well. Shoddy workmanship from the sub-contractor and all who obviously was in a hurry to get it done. Well, if you want things done right, you gotta do it yourself.
Here's what the surface of the countertop looked like before. Dollops of paint from the painters and generally rough around the edges.
This is the surface after working upwards through 120, 240 and 400 grit discs on the power sander. Much smoother and no more blemishes. The swirls you see are the 'grain' of the concrete, much in the same way wood has grain. It's part of the character of the concrete. You can see how the grain in some places has changed after the powersanding.
Next up, wet sanding of the whole surface by hand, using 800 and 1500 grit tungsten carbide sandpaper. Concrete is itself very abrasive, containing sand and other rough stuff. It really wears thru the paper as you can see in the pic. By the time I finished the wet sanding process, it had been a solid 9 hours of sweat.
Here's how the counter looked like after the whole grinding/polishing process.
Next up, sealing and waterproofing the concrete with acrylic water-based sealant.
Step 1: Saturate the surface with water. I used a sponge for this. Let the water penetrate into the concrete for a few minutes.
Step 2: Wash the surface with 50% sealant solution. Let it soak in for a few minutes
Step 3: Gradually add 100% sealant onto the wet surface until its fully covered with full strength sealant. Let it penetrate for a few minutes. When it's soaked in nicely, wipe up the excess with a damn cloth. Let it cure for 30 mins or so, then repeat a 2nd coat.
Here's what it looks like all done. You can see a slight satin transluscent sheen on the countertop. That's the layer of acrylic that's formed on the surface. It's now waterproof.
And after all that hard work, ladies and gentlemen I present to you, the piece de la resistance...
Here's what the surface of the countertop looked like before. Dollops of paint from the painters and generally rough around the edges.
This is the surface after working upwards through 120, 240 and 400 grit discs on the power sander. Much smoother and no more blemishes. The swirls you see are the 'grain' of the concrete, much in the same way wood has grain. It's part of the character of the concrete. You can see how the grain in some places has changed after the powersanding.
Next up, wet sanding of the whole surface by hand, using 800 and 1500 grit tungsten carbide sandpaper. Concrete is itself very abrasive, containing sand and other rough stuff. It really wears thru the paper as you can see in the pic. By the time I finished the wet sanding process, it had been a solid 9 hours of sweat.
Here's how the counter looked like after the whole grinding/polishing process.
Next up, sealing and waterproofing the concrete with acrylic water-based sealant.
Step 1: Saturate the surface with water. I used a sponge for this. Let the water penetrate into the concrete for a few minutes.
Step 2: Wash the surface with 50% sealant solution. Let it soak in for a few minutes
Step 3: Gradually add 100% sealant onto the wet surface until its fully covered with full strength sealant. Let it penetrate for a few minutes. When it's soaked in nicely, wipe up the excess with a damn cloth. Let it cure for 30 mins or so, then repeat a 2nd coat.
Here's what it looks like all done. You can see a slight satin transluscent sheen on the countertop. That's the layer of acrylic that's formed on the surface. It's now waterproof.
And after all that hard work, ladies and gentlemen I present to you, the piece de la resistance...
Sorry for the long silence, I've been busy honeymooning, settling in to married life, getting my ass whipped at work, and most importantly, we didn't have internet in the crib when we first moved in.
Anyway, the house is done, and we're now living in it. We managed to move in the day after our wedding, spot on the deadline which is great.
I suppose you readers all want to see the end result of all the hard work now, so here goes...
This is the view through the front door, as you first enter. The faux-wooden 'boardwalk' is in. The material is Chalet Oak from Inovar floor. It feels great to walk on, almost like real wood.
This is the view standing at the front foyer and looking towards the back of the house. The pillar with the iron pipe has been boxed up with a shelving unit.
The living area, before we unpacked the sofa. Flooring is Canyon Oak, from Inovar. It's their entry level product, but it looks and feels decent nontheless. You may notice the lack of skirting on the wall. I requested for a flushed installation with end-profiles. Skirting is so yesterday.
L-shaped sofa set. From Enoma Collection, LDP Furniture Mall. Sounds like a cross between Renoma and Enema. No Enemas on my sofa, thank you. That said, it's pretty comfy and we got a good deal on it.
View from the kitchen looking out towards the front. Pardon the curtain rail, at that point it was just makeshift and I've since installed it properly and trimmed it to size. Finished pix on that later. Pardon the pile of trash too.
Several shots of the open kitchen.
And this is the view that greets us in the morning when we come down the stairs.
Anyway, the house is done, and we're now living in it. We managed to move in the day after our wedding, spot on the deadline which is great.
I suppose you readers all want to see the end result of all the hard work now, so here goes...
This is the view through the front door, as you first enter. The faux-wooden 'boardwalk' is in. The material is Chalet Oak from Inovar floor. It feels great to walk on, almost like real wood.
This is the view standing at the front foyer and looking towards the back of the house. The pillar with the iron pipe has been boxed up with a shelving unit.
The living area, before we unpacked the sofa. Flooring is Canyon Oak, from Inovar. It's their entry level product, but it looks and feels decent nontheless. You may notice the lack of skirting on the wall. I requested for a flushed installation with end-profiles. Skirting is so yesterday.
L-shaped sofa set. From Enoma Collection, LDP Furniture Mall. Sounds like a cross between Renoma and Enema. No Enemas on my sofa, thank you. That said, it's pretty comfy and we got a good deal on it.
View from the kitchen looking out towards the front. Pardon the curtain rail, at that point it was just makeshift and I've since installed it properly and trimmed it to size. Finished pix on that later. Pardon the pile of trash too.
Several shots of the open kitchen.
And this is the view that greets us in the morning when we come down the stairs.
Let's start with some good news first lah. The parquet flooring looks fabulous now, after varnishing. Yes, still a little mismatched, but its not so bad.
Now on to that **** bar counter...
As you can see, stage 1 of the concrete work went according to plan. I was thinking this is all going quite well. I laid out the wood where I wanted the 1 inch recess to fall.
When I came back to the house after work:
DUDE! I thought my design was to go straight across the bowl of the sink, not to curve around it. The contractor obviously took his own creative licence or something. Grrr... smells like a rectification job to me.
Anyway, here's a view looking in to the kitchen with the bar counter in place.
Over and out. For now.
Now on to that **** bar counter...
As you can see, stage 1 of the concrete work went according to plan. I was thinking this is all going quite well. I laid out the wood where I wanted the 1 inch recess to fall.
When I came back to the house after work:
DUDE! I thought my design was to go straight across the bowl of the sink, not to curve around it. The contractor obviously took his own creative licence or something. Grrr... smells like a rectification job to me.
Anyway, here's a view looking in to the kitchen with the bar counter in place.
Over and out. For now.
This here's the source of much of my stress: the bar counter that fell through the cracks. Quite literally.
While it was great to finally get work on this started, it wasn't all smooth sailing.
When I got there first thing in the morning, the contractor (different one from the main contractor) had already hacked the wall in the wrong place. This is despite my drawing on the floor the exact plan for the kitchen. The hacking on the right is the wrong one.
I laid the cornerstones exactly how I wanted them.
Later on in the day at lunchtime, there's progress. The wooden formwork is built. But they had marked the hole for the sink in the wrong place. Why does this sound familiar? Lucky I caught the mistake before any real damage was done.
View from the rear of the bar counter.
View from the front. The extra brickwall jutting out on the right is for knee-room when seated.
The hole to seat the sink in. Positioned CORRECTLY.
As of now they've poured the concrete into the form already. Hope it turns out according to expectations when I go there in the morning. Stay tuned.
While it was great to finally get work on this started, it wasn't all smooth sailing.
When I got there first thing in the morning, the contractor (different one from the main contractor) had already hacked the wall in the wrong place. This is despite my drawing on the floor the exact plan for the kitchen. The hacking on the right is the wrong one.
I laid the cornerstones exactly how I wanted them.
Later on in the day at lunchtime, there's progress. The wooden formwork is built. But they had marked the hole for the sink in the wrong place. Why does this sound familiar? Lucky I caught the mistake before any real damage was done.
View from the rear of the bar counter.
View from the front. The extra brickwall jutting out on the right is for knee-room when seated.
The hole to seat the sink in. Positioned CORRECTLY.
As of now they've poured the concrete into the form already. Hope it turns out according to expectations when I go there in the morning. Stay tuned.
It's finally begun, the construction of the concrete bar counter which forms the 'chassis' of our dry kitchen.
The parquet on the staircase and the whole first floor is also being re-grained, which means the end is in sight!
Keep tuning in, there will be pics to follow later in the day.
The parquet on the staircase and the whole first floor is also being re-grained, which means the end is in sight!
Keep tuning in, there will be pics to follow later in the day.
There's gotta be something more fun than watching concrete dry...
Like having the sink and tiles put in
Jolly good.
Like having the sink and tiles put in
Jolly good.
I'm back from my trip to Melbourne, which explains the long lapse in updates, and also have started a new job which means I'm not as free to write this blog as I used to be. Nontheless, I shall try my best to keep these coming.
There's been a whole lot of progress over the past 2 weeks plus, so I'll just let the pictures do the talking
Here goes!
This is how the living hall started out
View with the kitchen wall demolished
The main dividing wall into the old car porch demolished
Bricked up the old car porch entrance, opening for tall windows
View from the front, looking in. The old front door will go.
The newly-poured concrete first floor. That's the bathroom floor/living room ceiling.
Poured the concrete floor for the new living area.
Wide open space looking into the house. Unfortunately,we're stuck with a pillar or 2. And no more front door.
Plastering up.
This is how the light falls.
There's been a whole lot of progress over the past 2 weeks plus, so I'll just let the pictures do the talking
Here goes!
This is how the living hall started out
View with the kitchen wall demolished
The main dividing wall into the old car porch demolished
Bricked up the old car porch entrance, opening for tall windows
View from the front, looking in. The old front door will go.
The newly-poured concrete first floor. That's the bathroom floor/living room ceiling.
Poured the concrete floor for the new living area.
Wide open space looking into the house. Unfortunately,we're stuck with a pillar or 2. And no more front door.
Plastering up.
This is how the light falls.
Subscribe to:
Posts (Atom)